Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2004, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 6 Sep 2004 21:54:03 -0700
Reply-To:     Vince S <gipsyflies@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Vince S <gipsyflies@COMCAST.NET>
Subject:      Re: What voltage do injectors need to fire?
Comments: To: "Daniel L. Katz" <katzd54@YAHOO.COM>
In-Reply-To:  <vanagon%2004090700205887@GERRY.VANAGON.COM>
Content-Type: text/plain; charset="us-ascii"

Everything Dennis said is true. All the injectors are fired together whether if the intake is open or closed. Sequential fuel injection the Digi-faint is not. The ECU controls the duty-cycle of the on time according to throttle/load/engine/ambient condition.

- Vince

http://gipsyflies.home.comcast.net 1989 Vanagon GL Camper 1993 Mazda Miata (for sale) 1996 Land Rover Discovery 2005 Mini Cooper S

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Daniel L. Katz Sent: Monday, September 06, 2004 9:11 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: What voltage do injectors need to fire?

surely you're joking (***...***).

On Mon, 6 Sep 2004 23:35:04 -0400, Dennis Haynes <dhaynes@OPTONLINE.NET> wrote:

>The 12 volts from the battery is connected almost directly. The ECU >completes the path to ground to fire them. The length of time (duty >cycle or dwell) determines the amount of fuel delivered. *** They are >triggered once/engine revolution ***. Auto parts sores sell "noid" >lights which connect to the injector plugs to test the circuit. *** All

>of the injectors on the Vanagon are connected in parallel and fire >simultaneously ***. > >Dennis > >-----Original Message----- >From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf

>Of tabe johnson >Sent: Wednesday, September 01, 2004 7:55 PM >To: vanagon@GERRY.VANAGON.COM >Subject: What voltage do injectors need to fire? > >With the Digifant system, does anyone know what >voltage the ECU sends to the injectors to get >them to open? I'd need an oscilloscope to measure >this and sadly I'm without. > >Thanks! > >--tabe johnson >xtabe@yahoo.com >Vancouver, BC > > > >______________________________________________________________________ >Post your free ad now! http://personals.yahoo.ca


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.