Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2004, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 8 Sep 2004 12:07:21 -0700
Reply-To:     Vince S <gipsyflies@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Vince S <gipsyflies@COMCAST.NET>
Subject:      Re: looking for technical assistance in Wisconsin or Michigan/UP
Comments: To: Greg Potts <Greg@POTTSFAMILY.CA>
In-Reply-To:  <E4A3A507-01B2-11D9-9933-000A95ABA42A@pottsfamily.ca>
Content-Type: text/plain; charset="us-ascii"

What! Vanagon's standard configuration has a fuel filter downstream of the pump. The safety cut off may be 110 PSI but I seems to remember the regulated pressure is under 30 PSI.

- Vince

http://gipsyflies.home.comcast.net 1989 Vanagon GL Camper 1993 Mazda Miata (for sale) 1996 Land Rover Discovery 2005 Mini Cooper S

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Greg Potts Sent: Wednesday, September 08, 2004 9:20 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: looking for technical assistance in Wisconsin or Michigan/UP

Hi Malcolm,

I don't think that a filter after the pump is a good idea. The high-pressure cut-off on the bosch fuel pump for a vanagon is about 110 PSI. If anything ever did get past the first filter to plug the second one then that second filter and the clamps and line back to the pump are going to take a huge pressure load. I don't think that would be pretty.

You do want to have a filter in front of the pump, this will protect the pump's innards. If you must have two filters inline I'd suggest you put both of them upstream from the pump.

Happy trails,

Greg Potts Toronto, Ontario, Canada

1973/74/79 Westfakia Conversion **Bob the Tomato** LY3H 1977 Sunroof Automatic L63H/L90D http://www.pottsfamily.ca/westfakia http://www.busesofthecorn.com

On 8-Sep-04, at 8:56 AM, Malcolm Stebbins wrote:

> --- James Fritz <jfritz@ALPINECOM.NET> wrote: > >>> As you may recall, the problem was a little plastic inverted cone >>> shaped filter on the inlet side of the fuel pump. It was packed >>> full of rust and crud. > > For this reason I put a fuel filter BEFORE and AFTER the fuel pump. M


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.