Date:         Tue, 21 Sep 2004 16:35:48 -0600
Reply-To:     Richard A Jones <jones@COLORADO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Richard A Jones <jones@COLORADO.EDU>
Subject:      Re: dual battery isolator / Optima Batteries
Comments: To: gipsyflies@COMCAST.NET
Content-Type: text/plain; charset=us-ascii; format=flowed

> I screwed a #4 x
> 3/8ths" stainless steel pan-head/phillips head screw into that very
> small gap between the core and the outer ring.

I interpret this to mean the screw forced the inner and
outter lead into contact opposite the screw.  If there
is enough contact, he should be OK and the screw won't
even be in the current path.  But what is "enough"?

                        Richard A Jones
                        Boulder, Colorado

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.