Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2004, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 19 Sep 2004 21:54:00 -0700
Reply-To:     Mike Miller <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike Miller <mwmiller@CWNET.COM>
Subject:      Re: oil drain not snug. feels loose
Comments: To: Joseph Fortino <fortino1@EARTHLINK.NET>
In-Reply-To:  <25017703.1095652507985.JavaMail.root@grover.psp.pas.earthlink.net>
Content-type: text/plain; charset="US-ASCII"

Sometimes an extra washer gets put on. Feels like what you describe.

Mike

On 9/19/04 8:55 PM, "Joseph Fortino" <fortino1@EARTHLINK.NET> wrote:

> Thanks I know the MMO did'nt do it, i was just adding my MMO and went to > tighten the > drain plug and it did'nt feel quite right, its not finger loose but its not > real snug like it use > to be. I'm really careful on how much i tighten things so this is a shock to > me. > > Joe > > -----Original Message----- > From: Robert Cardo <rrecardo@WEBTV.NET> > Sent: Sep 19, 2004 8:35 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: oil drain not snug. feels loose > > I don't believe it's cross threaded. > I think that somebody tightened the drain plug down to tight and took > the threads with the plug. > They are spinning around with the plug right now. > Find a metric / american conversion thread chart and tap the hole to the > next size bigger in american threads. > Put an new short bolt in the drain hole with a copper or nylon washer > for the seal. > You can try and chase what you have, but chances are the threads are > beyond repairing. > The MMO didn't do it. > > RC > > > Subject: oil drain not snug. feels loose > well tonight after doing my MM OIL treatment, I put my drain bolt back > up and the damn thing seems soft and won't tighten feels loose and now I > got a drip, could a worn washer be the ticket? not allowing it to > tighten all the way??I'm going to drain the oil in a few days, might > have to get a new bolt also? hope my block isn't cross threaded? > Joe > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.