Date:         Thu, 23 Sep 2004 22:24:10 +1200
Reply-To:     Andrew Grebneff <andrew.grebneff@STONEBOW.OTAGO.AC.NZ>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Andrew Grebneff <andrew.grebneff@STONEBOW.OTAGO.AC.NZ>
Subject:      Re: South African Grille headlight conversion on an 84 Vanagon
In-Reply-To:  <E1CA99c-0001QE-00@bittern.mail.pas.earthlink.net>
Content-type: text/plain; format=flowed; charset=us-ascii

>One responder raised an interesting point about how I wish to wire the
>two sets of lights in the SA Grille.  ie
>
>-outers low beams & inners high
>
>or
>
>-outers both low and high and inners running lights
>
>How are stock SA's set up?  How do 85's and later (4 square lights) work?
>  I have an 84 with only 2 (high and low) headlights so I don't really
>know how the 4 light setups normally operate?
>
>Thanks Again,
>   Tolga

RSA lights are:
outer--- hi/lo
inner--- hi only

It appears that some US vendors have been selling the RSA kits with
driving lights instead of the stock high-beam units, judging by what
I've heard on the list.
--
Andrew Grebneff
Dunedin
New Zealand
Fossil preparator
<andrew.grebneff@stonebow.otago.ac.nz>
Seashell, Macintosh, VW/Toyota van nut