Date:         Sun, 26 Sep 2004 20:20:00 -0700
Reply-To:     jeff@VANAGONPARTS.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeff at Vanagonparts <jeff@VANAGONPARTS.COM>
Subject:      Re: Rear heater valve O-ring size?
Comments: To: Shawn Wright <swright@ZUIKO.SLS.BC.CA>
In-Reply-To:  <41570E48.4663.D5A01C8E@localhost>
Content-Type: text/plain; charset="US-ASCII"

Shawn,

Not common at all.  The O-ring for the heater valve is flat sided, not round
like a normal O-ring.  Spend the couple  of bucks and get the correct seal.

Cheers,

Jeff
www.vanagonparts.com



-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
Of Shawn Wright
Sent: Sunday, September 26, 2004 6:45 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Rear heater valve O-ring size?


Can anyone tell me whether the rear heater valve O-ring for an '88 Vanagon
might be a common size? Part # 861 819 297

Mine is brittle and cracked, so it's hard to tell the size of the original -
if I can
get one locally it would save me some time...

Thanks.--
Shawn Wright
http://Zuiko.sls.bc.ca/swright
~This message sent by Pegasus Mail, the safe E-Mail alternative~
"Friends don't let friends use Outlook"