VANAGON archives -- September 2004, week 4 (#462)

Date:         Mon, 27 Sep 2004 17:02:55 -0700
Reply-To:     Jeffrey Schwaia <jeff@VANAGONPARTS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jeffrey Schwaia <jeff@VANAGONPARTS.COM>
Subject:      Re: bolt needed for seat rails
Comments: To: Angus Gordon <agordon@BRIGHT.NET>
In-Reply-To:  <4.2.0.58.20040927191343.00b75240@mail.bright.net>
Content-Type: text/plain; charset="us-ascii"

That's correct, my bad: 6mm X 1mm X 15mm

Cheers,

Jeff


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
Of Angus Gordon
Sent: Monday, September 27, 2004 4:19 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: bolt needed for seat rails


Jeff wrote, re seat pan bolts;
>The size is 8mm, the pitch 1.25mm, the length is supposed to be 15mm.


Hmmm...

Just measured one out of an '85 or '86 seat pan here and it's 6x1.0 , about
12mm long. Still hardware store material...

Angus

================================
Angus Gordon                       '89 Carat
NW Ohio                            '86 Syncro

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.