Hey all, I checked the archives but didn't find exactly what I was looking for. I am going to remove my radiator to check for blockage, cracks , etc.. I haven't had the radiator fan come on in over a year, and my van overheats in traffic (time+idle+no forward movement). The fan works, the switch works, the system is bled properly, and after a 30 minute drive in 90 degree heat, the radiator is about 100 degrees.. I suspect there is some major blockage in there... I want to try and clamp off the input and output hoses with my ez clamp-do-jobs so the system all the coolant doesn't just flow out. **Is this feasible? Has anyone else ever successfully clamped off the hoses? Also, how much coolant should I be prepared to have come out of the radiator (non -A/C model)? Should I park the van on a steep driveway (nose up) to help keep the coolant from draining out the front? Am I just doomed to let all the coolant drain? ;) TIA, after being an Air cooled nut for so long, I think I am just scared by the mysterious water cooled system;) C.B. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.