Thanks for the input on the poor-running 2.1. Here's what I've heard so far: 1. Bad ground between the head and the chassis. Test: run a new ground. 2. Bad hall-effect sender. Test: ?? 3. Bad cold-solder joints in the computer. Test: ?? 4. Coil. Test: I assume he can test by pulling the coil wire and checking for spark to ground when the engine is hot. If anyone knows how to test for these problems, I'd appreciate hearing about it. Thanks all for your input, Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.