To use the Shurflow, or one of our European faucets you need to make a cover plate to fit over the original hole. The faucet would mount through a hole 3/4 inch on the shurflo, or a bit smaller on the euro brand (Keller). If someone wants to make a paper template of the opening and mounting holes, I can have a stainless steel cover plate made and offer this as a kit. The nice thing about this conversion, is that you get much more control over the water volume and the faucet will pivot in 2 directions. The on and off is built in to the handle and they offer you a little bit of control over the water volume.
-- Steve Lashley SKL Enterprises Inc. http://EuroCampers.com PO Box 339 1661 Veterans Dr Ste C DeSoto MO 63020 636-337-7700 voice 636-586-7077 fax 888-797-5994 - phone orders |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.