Date:         Fri, 1 Oct 2004 12:33:01 -0400
Reply-To:     Tolga Morawski <tolga@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tolga Morawski <tolga@MAC.COM>
Subject:      Re: First cold day- alternate replacement switch
Comments: To: dbeierl@ATTGLOBAL.NET
Content-Type: text/plain; charset="US-ASCII"

David,
  What relay did you use and how did you wire it as I'd like to give this
a try.  Do I need to get into the heater box for the fused circuit to run
the blower on high?

Thanks!
   Tolga

>Date:    Thu, 30 Sep 2004 13:56:04 -0400
>From:    David Beierl <dbeierl@ATTGLOBAL.NET>
>Subject: Re: First cold day- alternate replacement switch
>
>At 13:32 9/30/2004, don spence wrote:
>
>>Any suggestions a s to what to replace the switch with??
>>On Thursday, September 30, 2004, at 10:57 AM, Automatic digest
>
>Leave the switch alone, but run a separate fused circuit to power the
>blower on high speed; switch it with a relay controlled by the high-speed
>wire from the switch.  It's the last time you'll think about it, except
>when people grumble about their switches melting.
>
>:)
>d