Date:         Tue, 5 Oct 2004 10:05:57 -0500
Reply-To:     Jamie Foust <foust@CECLAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jamie Foust <foust@CECLAC.COM>
Organization: Civil Engineering Consultants
Subject:      aircooled intake elbow
Comments: To: type2@type2.com
Content-Type: text/plain; charset="iso-8859-1"

Looking for the intake elbow (boot) for a 1980 air-cooled vanagon.
Part# 071 129 967 (afm to throttle body)
The elbow has been replaced with the water cooled elbow part#  025 129 967a,
and the alignment and fit is very poor.  The Bus Depot paper catalog lists the item but it is not
found on the catalog web site.  I am also looking for a good speedometer cable, the upper
cable that connects from the egr box to the speedometer - but I need the later clip style, not 
the early screw style.  


James M. Foust
Architectural Drafter
Civil Engineering Consultants

TERMS AND CONDITIONS FOR YOUR USE:

Civil Engineering Consultants, Inc. (hereinafter referred to as "CEC") is providing data (electronic or otherwise) to you solely at your request and for your convenience and use.  CEC makes no guarantee of compatibility of files with other software or hardware.

This information represents the current status of the project and makes no guarantee to the final design and/or construction. Changes may occur without notice to the user of this data and it is the sole responsibility of the user to verify all elements included herein. Any use or reuse of original or altered electronic files shall be at the user's risk and full legal responsibility.

These files were prepared by CEC and are instruments of CEC's service for use solely with respect to this project.  CEC will be deemed the Author of these documents and will retain all common law, statutory, and other reserved rights, including the copyright.