Date:         Fri, 1 Oct 2004 11:05:51 -0700
Reply-To:     Doug in Calif <vanagon@ASTOUND.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Doug in Calif <vanagon@ASTOUND.NET>
Subject:      Shore power plug  shore power  110vt power
Content-Type: text/plain; charset="iso-8859-1"

I am installing a 110vt shore power plug on the westy conversion and I am wondering where to put it on the van.

I have considered since its a syncro to install it where the fuel filler is on the 2wd because there is a round flat section of metal there 
and the plug I am using from West Marine is a round plug.

http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&classNum=311&subdeptNum=310&storeNum=9&productId=14773

I am wondering if "shore power" in campgrounds is normally located on one side or the other with respect to drivers / pass sides

Any thoughts?

Thanks,

Doug

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.