Date:         Wed, 6 Oct 2004 09:59:44 -0600
Reply-To:     don spence <dspence@OANET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         don spence <dspence@OANET.COM>
Subject:      Re: Replacing Fuel lines - Lengths?
Comments: cc: xtabe@YAHOO.COM
In-Reply-To:  <200410061503.i96F39L29431@moe.oanet.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed

For the terminally confused the best procedure is: Remove hose "A", cut
new hose  to length, replace hose "A".  Remove hose "B"  cut new hose
to length, replace hose "B"  etc. etc until all your hoses are shiny
new ones. Don't forget the litle ones hiding by the firewall.


On Wednesday, October 6, 2004, at 08:59 AM, Automatic digest processor
wrote:

> Date:    Wed, 6 Oct 2004 02:14:13 -0400
> From:    tabe johnson <xtabe@YAHOO.COM>
> Subject: Replacing Fuel lines - Lengths?
>
> Does anyone have the lengths of the fuel lines in the
> 2.1 engine bay at their fingertips?  I'd like to cut
> my fuel hose before I start pulling out the old ones
> to prevent confusion.  I confuse eassily.
>
> Thanks!
>
> --tabe johnson
> xtabe@yahoo.com
>