Steve, If you pull the arm rest out a little you will see a roll pin in there that holds it on. Knock that out with a drift, the arm will come off then lock tight the hinge back together and reinstall the arm rest and roll pin. Jere 90 GL/Carat-a-version 88 GL 87 Wolfy (parts) -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Al and Sue Brase Sent: Wednesday, October 13, 2004 10:25 PM To: vanagon@GERRY.VANAGON.COM Subject: Armrest loose- was Re: 91 Carat Drivers Seat Armrest On a related subject, the screws that hold mine to the seat are getting loose. How can I tighten them without making holes in the vinyl? Al Brase Steve Drier wrote: >Have been looking for a rightside drivers seat armrest for my 91 Carat with >no luck. Anybody have suggestions where I might find same? I am in the Seattle > area. > >Thanks, > >Steve > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.