On 10/14/04 4:12 PM, "Zach White" <zwhite@DARKSTAR.FROP.ORG> wrote:

> On Thu, Oct 14, 2004 at 05:29:12PM -0400, Prendergast David wrote: >> Ok, I noticed today that I have no brake lights, everything else tail >> light wise works fine. Did some research on the archives and I think >> it may be the switch or the fuse. Looking over the fuse box I don't >> see any fuses that are blown so it must be the switch, so my question >> is......where exactly is the switch located? >> The bentley doesn't show you where it is. > > Dave, > > Remove the plastic surrounding the steering column (you just need to remove > the bottom piece, the top piece between the dash and the wheel can be left > alone). A few inches from the bottom of the steering column you'll find a > terminal and a wire. Make sure that connection is good. I had the same problem > and that seemed to fix it. > > The switch should be somewhere in that vicinity too, but as fixing the broken > connection there fixed my problem, I didn't investigate any further. > > -Zach > > The brake switch itself is on the side of the master cylinder.

•••••••••••••••••••••••••••••••••••••••• jimt Planned insanity is best. Remember that sanity is optional. http://www.tactical-bus.info (tech info) http://www.westydriver.com