Date: Mon, 18 Oct 2004 23:09:07 +0000
Reply-To: kenwilfy@COMCAST.NET
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Kenneth Wilford <kenwilfy@COMCAST.NET>
Subject: Re: AMC / German Cylinder Heads
I bought a few sets of these about two years ago to do the same thing (compare them with the AMC). Unless something has majorly changed you will see they are the same. I think I remember them saying "Germany" on the outside of the box and coming in a Kohlbenschmidt box but that is a lot different than saying "Made in Germany". I don't remember them actually saying made in Germany on the head anywhere. You will see that where the "AMC" normally is the KS logo has been engraved into the head.
If you find anything different let us know.
Ken Wilford
John 3:16
www.vanagain.com
> That's the confusion: AMC heads are definitely made in Spain, however, it
> was reported on this list that the Kolbenschmidt heads are actually
> relabeled AMC heads. Today, I was told by my supplier that the
> Kolbenschmidt heads are actually German made (i.e., not AMC). I really
> won't know for certain until the Kolbenschmidts arrive and I do a
> side-by-side comparison. If they came from the same mold it should be
> fairly obvious.
>
> Cheers,
>
> Jeff
> www.vanagonparts.com
>
>
> -----Original Message-----
> Wrom: TTZRCLBDXRQBGJSNBOHMKHJYFMYXOEAIJJPHSCRTNH
> Sent: Monday, October 18, 2004 2:38 PM
> To: Jeffrey Schwaia
> Cc: vanagon@GERRY.VANAGON.COM
> Subject: Re: AMC / German Cylinder Heads
>
>
> Now the question is this...
> I bought a Vw remanufactured engine from south africa.. but when i
> opened the box it came in... it had inspection stickers as far as run
> inspection stickers from Frankfurt, Germany.. and all paper work was in
> german inside the box..
> would that mean my AMC heads that are one my engine are the German ones?
> any input?
> thanks all,
> jess
> 89 carat
>
> On Oct 18, 2004, at 4:56 PM, Jeffrey Schwaia wrote:
>
> > I hate to revive this thread, however, I just spoke with my supplier
> > of the
> > Kolbenschmidt WBX'er cylinder heads and he assured me that they are
> > indeed
> > made in Germany. He says Germany is cast in the head and stamped on
> > the
> > box.
> >
> > I've placed an order for a few sets so I should be able to confirm
> > this when
> > they arrive and I compare them side-by-side to the AMC. I'll keep the
> > list
> > posted.
> >
> > Cheers,
> >
> > Jeff
> > www.vanagonparts.com
|