Hi folks, I seem to have a small coolant leak that i am positive is coming from the low side of hose #11 on this chart (part # N 901 287 03): http://www.vanagain.com/19lchc.htm this tiny hose is new, and the clamp is on there really tight. feeling around down on the underside of the hard metal pipe on the driver's side of this connection, there seems to be a small, roundish tab of metal built on to the pipe. It is the only thing that I would guess that may be keeping the hose from making a tight seal. Anyone else experience this leak before? If I don't drain the whole system, and pull the hose off all the way to replace or reseat it, will I get dumped with a ton of coolant or just a little? If you could, please pmail any suggestions or comments as I am set to "no-mail" right now. Thanks! -James '83.5 Camper 2.1L Digijet WBX _________________________________________________________________ Don’t just search. Find. Check out the new MSN Search! http://search.msn.click-url.com/go/onm00200636ave/direct/01/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.