Date:         Tue, 19 Oct 2004 17:18:11 -0400
Reply-To:     kdlewis_wasting_time@ACCESS4LESS.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kdlewis_wasting_time@access4less.net"
              <kdlewis_wasting_time@ACCESS4LESS.NET>
Subject:      Re: '88 engine knock diagnosis: Thanks, but there is more
Comments: To: ericmail@STARPOWER.NET
Content-Type: text/plain; charset="iso-8859-1"

Eric,

  If a rod bearing is suspect I would drain the oil into
something that will strain out any metal bits that might be
present. Also I would try and open the oil filter and
inspect the material. You can not use a hacksaw because this
would create filings. I have used a giant pipe cutter.
  If nothing is present I would use a long screw driver to
home in on the noise. Place the blade on the block and the
handle against your ear.
   I have heard exhaust leaks near the head sound similar to
the noise you describe. Use a piece of hose as a Stethoscope
to locate these.
Good Luck

      Ken Lewis
 86 Transporter Crew Cab, 60 T-5 Coupe
 http://neksiwel.20m.com/   O2  sensor monitor gadget, my
cars, Vanagon Tech
 http://EB03.20m.com/  Everybus 2003  pictures