Date:         Wed, 20 Oct 2004 12:57:34 +0200
Reply-To:     Raimund Feussner <rfeussner@GMX.DE>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Raimund Feussner <rfeussner@GMX.DE>
Subject:      Re: Rear disk brakes
Comments: To: Fin Beven <FinBeven@MSN.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

http://vwbus-online.de/feussner/bremse/

These are the brakes I developed with my friend for his mid-engine
doublecab.
288x25mm vented up front, 245x10mm (solid) rear. All and only VW/Audi parts
(except adaptors).
No machining or modification on Vanagonīs suspension necessary, just bolt
on.


I sell the complete setup for 2060Euro plus shipping (all new parts:
adaptors, calipers, pads and rotors, etc)
The front is 1160Euro, the rear 900.

I havenīt shipped to the US yet, though.

Raimund

----- Original Message -----
From: "Fin Beven" <FinBeven@MSN.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, October 20, 2004 12:09 AM
Subject: Rear disk brakes


I just replaced my wheels and tires with the 15" alloy wheels that Go Westy
sells, and the Michelin "Hydro-Edge tires that they recommend.

The front disk brakes look just OK, but the rear drums look rather bad, and
quite rusty.

I'd guess that this question has been asked several times before, but is
there a rear disk brake conversion kit ??

Thanks,

Fin Beven
'90 Carat, Custom Camping Conversion
Pasadena, CA