Date: Mon, 18 Oct 2004 06:10:55 +0000
Reply-To: Chris DeLong <green536@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Chris DeLong <green536@HOTMAIL.COM>
Subject: Re: removing side window & saving seals
Content-Type: text/plain; format=flowed
It is almost as easy to get them back in as it is to get them out. It is
rather difficult to descirbe but it involves placing string in the seal and
having a buddy press on the window while you on the inside pull the string
all the way around the seal and pull it into the body. Sorry for the run-on.
I didnt use any sealer on my Van and it doesnt leak. I live in Seattle. So
if its gonna leak it will be in my neck of the woods ;)
>From: Peter Lackner <peter.lackner@verizon.net>
>To: Chris DeLong <green536@HOTMAIL.COM>
>CC: vanagon@GERRY.VANAGON.COM
>Subject: Re: removing side window & saving seals
>Date: Sun, 17 Oct 2004 16:39:50 -0700
>
>Hi Chris and/or others-
>I'm thinking of switching and reversing those windows on my '90 Wessi to
>have the venting sections near the back of the bus instead of front. I've
>seen that in a few vanagons and it seems to make a lot more sense - easily
>accessible from the bench and/or bed, more air where you need it, etc.
>
>I heard it really IS as easy as you say to get them out, But to get them
>back in and watertight do you need new rubber strips, seals, sealant, or
>anything? I.e. is the process of getting them back in just as easy, and
>what is it?
>Thanks in advance -
>
>Peter Lackner
>Santa Barbara CA
>
>
>On Oct 17, 2004, at 2:56 PM, Chris DeLong wrote:
>
>>If this is about the windows behind the front doors then you need to do
>>the
>>following:
>>
>>1. lay on back with feet on window.
>>2. apply pressure with feet on corner of window.
>>3. have buddy catch window as it comes out.
>>4. have a beer and talk with buddy about how easy that was :)
>>
>>
>>
>>>From: don spence <dspence@OANET.COM>
>>>Reply-To: don spence <dspence@OANET.COM>
>>>To: vanagon@GERRY.VANAGON.COM
>>>Subject: Re: removing side window & saving seals
>>>Date: Thu, 14 Oct 2004 09:33:21 -0600
>>>
>>>You can make the tools from an old yardstick. Use liquid soap or dish
>>>detergent to lube the seals. WD40 may attack the seal material.
>>>On Thursday, October 14, 2004, at 08:27 AM, Automatic digest processor
>>>wrote:
>>>
>>>>Subject: Re: removing side window & saving seals
>>>>
>>>>Actually there are regular glass tools for this- hardwood sticks
>>>>tapered
>>>>down like a carpenters pencil. Probably made by Somaca, a glass
>>>>products
>>>>company. Much less likely to make a high pressure point that would
>>>>break tempered glass. You could make your own. Wooden oversized flat
>>>>screwdrivers.
>>>>Al Brase
>>>>69 doublecab, vanagons
>>>>
>>>>VWNut Hawk wrote:
>>>>
>>>>>I was able to get them out.
>>>>>I took a flat blade screw driver and squirted wd40 inside the seal
>>>>>next
>>>>>to the body.
>>>>>Then use multiple flat blade scew drivers and slowly, carefully work
>>>>>and pry the whole window out with the seal.
>>>>>
>>
>>_________________________________________________________________
>>Don’t just search. Find. Check out the new MSN Search!
>>http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>>
>
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
|