Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2004, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 23 Oct 2004 17:49:02 -0500
Reply-To:     rrecardo@WEBTV.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Cardo <rrecardo@WEBTV.NET>
Subject:      Re: noise reduction
Comments: To: Reinhard Vehring <rvehring@YAHOO.COM>
In-Reply-To:  Reinhard Vehring <rvehring@YAHOO.COM>'s message of Sat, 23 Oct
              2004 11:11:50 -0700
Content-Type: Text/Plain; Charset=US-ASCII

Reihard, I don't know how you will do road noise testing without trying to pad the underside of your Van from the source of the noise. Your sitting right on top of the major offensive area. The tires spinning on the road's surface. The other is the back back side of the Van ( engine, exhaust, tires in the wheel wells.) The only proven to work method is dampening the sound with a harmonic, noise absorbing material, on the top side of the sheet metal, as well as the bottom side. The simple to explain way to get this job done is the more padding in problem area's, the quieter the ride. I have a friend up in Canada who own's and drives a truck. He, when the truck was new had the mfg. add the optional winter insulation kit to the cab of the truck. On the bottom of the cab floor is glued black, dense, foam rubber. Under the rugs is more foam rubber of a different density. Inside the doors is more insulation. Inside the interior panels is more. This tractor is like riding in a Rolls Royce. It's not only drum tight, but almost an ere quiet. I would suggest to you rather than taking all the time with your DB meter poking around inside the Van as your driving down the highway trying to locate the source of the problem, insulate the interior and the bottom side from the obvious road,& tire noise and your search would be over. Also, you might consider replacing the old, shrunk, door and rear hatch gaskets. You might think they are making contact to the body just fine, but old rubber does shrink and will allow air to bypass them. Have you changed them prior to your DB meter tests? You should . It will make a big difference.

RC


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.