Doug, 3-m Body panel adhesive. It's used on all the later model automobiles to fasten all the sheet metal panels and inner supports. Tough stuff, and it'll ever shake loose, crack, or separate from the repaired area. It also dispaces moisture so at that particular repair area it will be good for a long time. Available at any body shop supply. An excellent , long term repair compound.
E-mail message Subject: How to fix / External body panel internal supports coming loose Anybody know how to re-attach the interior cross over supports in the back of the van to the outer body skin. I have my door panels out and noticed the cross over supports are not stuck in the adhesive the factory attached them with. You can wiggle them and they are totally free. Does 3M or other make a goop to re-attach? Thanks Doug |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.