In a message dated 10/27/04 5:50:41 PM, manikmike@YAHOO.COM writes: << 1) How to move the pistons without disassembling the calipers and without the spiffy piston position-correcting VW tool (US 1023/2)? >> Depends on how much ca-ca is in the caliper. But first, I have been taught that it is verboten to split a caliper body. I've never been told why, but I imagine it is because the bores in the caliper halves must be in precise alignment. And, I've never seen a garage with the time, the jig nor the desire to maintain this alignment. At various times all of the following have worked for me with various degrees of difficulty: 1/ Use a pair of battery terminal spreader pliers with jaws cut short enough to fit between the caliper halves. 2/ A piece of 1/8" flat steel with a width sized to just fit the ID of the piston, can be bent into almost an "L" shape. The short arm of the "L" is just long enough to fit between the caliper halves and it is inserted into the hollow of the piston. Then, while pushing on the long arm so as to cock it in the piston hollow, this lever is used to rotate the piston to its proper position. 3/ If you like some risk and have a steady hand, just push tangentially with a flat bladed screwdriver on whichever corner of the piston cutaway that will rotate it in the correct direction. The risk is that this method can puncture a dust boot if the screwdriver slips. This is the real animal approach, but doable. George |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.