4.2 mm X 19 mm long, sheet metal screw. Try a #12 X 3/4 -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Todd P. Last Sent: Monday, October 25, 2004 11:21 AM To: vanagon@GERRY.VANAGON.COM Subject: Fastener terminology in ETKA In Etka, how do you dechipher the following: tapping screw B 4,2 x 19 I wanted to try getting some fasteners locally rather than at the dealer (because they usually are .50 to $2 each) but need to know how to translate the terminology into something that I can use at the local hardware parts bin. thanks,
Todd '88 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.