Yep, I did the same to the pass side of the 90 at the wrecker. Tried to carefully pull it out because the van was pinned in there. It tore after I got about 1/2 of it free. Better to pull the door on a parts van first to get the seal and the channel. Doug
----- Original Message ----- From: JordanVw@aol.com To: vanagon@astound.net ; vanagon@GERRY.VANAGON.COM Sent: Friday, October 22, 2004 11:43 AM Subject: Re: noise reduction
In a message dated 10/22/04 11:23:32 AM Eastern Daylight Time, vanagon@ASTOUND.NET writes:
If they bolt on perhaps Chris can pull a set from one of his late model rigs.
i have pass side ones available, drivers side is up against a wall and i already ripped the seal trying to get it off without removing the door chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.