Date:         Fri, 22 Oct 2004 06:00:29 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Headlight adjustment screws
Content-Type: text/plain; charset="US-ASCII"

In a message dated 22/10/2004 5:18:56 AM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

It seems like they were pretty easy to put in. It seems like they
just snap  in or twist in?

    Warm the plastic before trying to install  them.  Use a hair dryer, heat
gun or dunk them in boiling water  or..........Better buy extras as they will
eventually break again and they will  soon become NLA then we will have to
become inventive until some enterprising  soul decides to reman them !


Cheers,

Frank  Condelli
Almonte, Ontario, Canada
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 09 ~ 12, 2005
'87 Westy, '90 Carat &  Lionel Trains
Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
(http://www.ccvwc.ca/)
Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
_STEBRO/Vanagon Stainless Steel  Mufflers_
(http://members.aol.com/Fkc43/stebro.htm)
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
or  http://frankcondelli.com