Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2004, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 5 Nov 2004 00:05:58 -0500
Reply-To:     Don in North Carolina <Don_Dixon@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don in North Carolina <Don_Dixon@BELLSOUTH.NET>
Subject:      Re: gear oil - rebuilt tranny
Comments: To: wlail@OU.EDU
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Warren,

I assume the only reason he suggests cheap oil at first is because of the short drain interval, probably to allow for the new parts to wear in. There really shouldn't be a great deal of metal shavings or flash in the oil, but since it's not that hard to drain, why not?

Just use the cheap oil for the first 300 miles or so, then change over to the Redline. You might want to strain the oil through cheesecloth when you drain it, to see what is in it.

Don in Reidsville, NC 1987 Vanagon GL Syncro

----- Original Message ----- From: "Warren Lail" <wlail@OU.EDU> To: <vanagon@GERRY.VANAGON.COM> Sent: Thu 04 November 2004 23:38 Subject: gear oil - rebuilt tranny

> Mateys, > > Yesterday afternoon I dropped the tranny in Billy Bones (took one hour) > and today took it to my rebuilder where > I traded it in on a freshly rebuilt 091 with a .78 fourth gear. My > rebuilder told me to run cheap oil for about 300 miles, > then drain it out, and then refill with Redline MT-90. I am a big fan of > MT-90, but do I really need to run the > cheap GL-4 for the first 300 miles? > > My flywheel seal is leaking (after only 12,000 miles) so I will replace > that while the tranny is out, and then I expect > to be on the road again tomorrow night. And while I'm in there I will > also install a new pilot bearing, even though the > one in there only has 12,000 miles on it. I can'f find one of those felt > washers. Hope it is not critical. > > But I sure would like to go ahead and run the MT-90 from the outset. > > What do you think? > > Warren Lail > 88 Westy "Billy Bones" > Single speed bike "Black Dog" (Eric's Eccentric ENO conversion) > > "He drank rum very strong all day, lookin' up somethin' fierce when spoken > to."


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.