Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2004, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 5 Nov 2004 20:53:23 -0600
Reply-To:     wlail@OU.EDU
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Warren Lail <wlail@OU.EDU>
Subject:      Re: whoa! loose washer on crank UPDATE
Comments: To: jesse johnson <jjmojo@blazenet.net>
Comments: cc: collum@verizon.net
Content-type: text/plain; charset=us-ascii

Okay, I've located the O-ring in the flywheel. It looks sort of smeared out. Will definitely replace.

But there is for sure only one shim and the thickness of it is not written on it (but Bentley said it ought to be.

Now, where do I get a tool to check end play and where do I get the proper shims?

Warren

----- Original Message ----- From: jesse johnson <jjmojo@blazenet.net> Date: Friday, November 5, 2004 8:43 pm Subject: Re: whoa! loose washer on crank UPDATE

> depends on how loose the end play was...but there should be > three... > get an end play tool.... and torque the flywheel down and see if > the > end play is in spec.. if not... you will have to get different > washers > to get it into spec.. the o-ring is in the flywheel itself.. look > on > the inside of the flywheel where it slides onto the crank.. it will > be > in a machined recess in the flywheel... i would replace it while > your > there.. get a small pick to get it out... > later, > jess > 89 carat > > On Nov 5, 2004, at 9:28 PM, Warren Lail wrote: > > > I just looked at Bentley and I'm not seeing an O-ring back there. > > > Bently also says there are to be 3 shims, but I only have one > (not > > counting the thrust washer). What the heck is going on here? > Can one > > shim be sufficient? > > > > Warren Lail > > 88 Westy "Billy Bones" > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.