If you are talking about the 3 or 4 levels that control the air flow and coolant flow, they pull off, but the top part may have broken off. Is the piece in the dash a plan piece of metal? If not its broken. I've had luck fixing these with liquid nails. Eric 86-VW4x4 vw4x4@fyi.net 86-SS Syncro Pittsburgh, PA USA 1936-Chrysler 92-Jetta GWC www.fyi.net/~vw4x4/vw4x4.htm On Fri, 19 Nov 2004, John Rodgers wrote: > The heat/cooling lever knobs were removed to allow for a repair. Now > they won't stay on. Any ideas as to how to get them to stay put??? > > Thanks, > > John Rodgers > 88 GL Driver > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.