Try some heat. If all else fails, I have used a head stud puller to attach to hex bolts before. I must agree with Dennis's approach, welding on to the bolts will make removing them much easier. Good luck, dylan Scott Norville <kr2no@EARTHLINK.NET> wrote: I have the Autozone brand of "bolt-out" or whatever. The problem is, the bolts are inset in the flex plate without enough clearance above or around the head to get one of these on it. I also have the kind you drill a hole in the head and screw into, but "screwed" is the key word whenever I have used these. Anyway, I don't weld and I need to get the bus back on the road so it will probably keep dripping (the tranny was out for rebuild). I might try hitting it with a propane torch and hammering in a bigger 12-pt, add some curses if the kids are out of earshot....
Dylan Friedman insyncro@yahoo.com 91 Syncro Westy GL 91 Syncro L 90 Carat 90 GL 87 Syncro GL --------------------------------- Do you Yahoo!? The all-new My Yahoo! – Get yours free! |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.