Date:         Sun, 21 Nov 2004 20:45:13 -0600
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: Fuel injection problem
Comments: To: phil cain <bearsvw2000@YAHOO.COM>
Content-Type: text/plain; charset=iso-8859-1

Check the four wires that go into the resistor pack. I've had wiries that
needed to be resoldered because they got frayed. Check the griound wire plug
in under the driver side air intake runners. Theye will be two white wires
in one set and a single white wire in another set and they're both ground
wires. Right 'white' not brown ground.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com


----- Original Message -----
From: "phil cain" <bearsvw2000@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, November 21, 2004 8:19 PM
Subject: Re: Fuel injection problem


> Still having the problem with the no fire on 1 &
> 3.Have replaced all the injectors with new ones and no
> help, still out. When I get a chance I'll check the
> wiring in it and try a different brain. This one is
> fun. Phil
>
>
>
> __________________________________
> Do you Yahoo!?
> The all-new My Yahoo! - Get yours free!
> http://my.yahoo.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.289 / Virus Database: 265.4.1 - Release Date: 11/19/2004
>
>



--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.4.1 - Release Date: 11/19/2004