Date:         Tue, 23 Nov 2004 11:28:22 -0600
Reply-To:     rrecardo@WEBTV.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Cardo <rrecardo@WEBTV.NET>
Subject:      Re: Re; Permanent Door Mirror Repair
Comments: To: vw4x4@FYI.NET
In-Reply-To:  Eric Zeno <vw4x4@FYI.NET>'s message of Tue, 23 Nov 2004 12:02:12
              -0500
Content-Type: Text/Plain; Charset=ISO-8859-1

Having any mechanical apptitude Mr. Zeno, you could possibly grasp the
poosible concept of removing and replacing the problimatic mirror mount
hex bolt.
All this is doing is replacing the hex stud and locking the mirror mount
down tight, without having to deal with the stud pulling out before
reaching the point of locking the arm to the mount.
As far as I can see it's a professional fix, and the mirror's don't
move, and a simple solution.
This is what is documented in the archives, I tried it, and it worked
better than anything else that had been ever suggested, like filing,
sanding,gluing whatever, to the ball mount.
You must have run to a real hill rod modified junker that you obviously
stripped because it was in tip top condition.

You took way too long to get the junk mirror working right, I would have
thrown it out.

LOL.


 This guy took the time to drill several holes thru the very bottom of
the plastic and into the ball to hold the mirror in place. He then
inserted a few screws as hard and deep as he could, causing several of
them to break off.   It took me several hours to undo all his damage,
and maybe 1/2 hour to get the mirror working correctly.>>
                                                                                                                            E