Date:         Thu, 2 Dec 2004 20:27:07 -0500
Reply-To:     Ken Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: Will this fit in my van
Comments: To: John Runberg <jrunberg@MAC.COM>
In-Reply-To:  <14808927.1102032857879.JavaMail.jrunberg@mac.com>
Content-Type: text/plain; charset=us-ascii; format=flowed

John you are right if we were talking about a GL or Carat/Wolfsburg rear
seat.  However the Westy rear seat does not have the metal pegs for the
backrest to snap onto.  Therefore it will fit and the only thing you
will need to do to mount it is to drill a few holes for the mounting
brackets and remove your rear pegs (they unscrew).  Remember a standard
Westy rear seat is only two seats wide so it will fit but have a gap
between the seat and the wall (one person wide).  If you got a seat from
a Wolfsburg Westy (no cabinetry) then this would be three people wide
and still not require the pegs.  I actually have one of these in brown
if anyone is interested.  You must pick it up but I would only like $100
obo for it (hey if you come here and I like you I may even just give it
to you- Richard, I am learning.  You the man!).

Ken Wilford
John 3:16
www.vanagain.com

John Runberg wrote:

>Dave,
>
>The answer is mostly. Seat will bolt in, but the retaining pegs for the seat back are a couple inches off. BTDT. You can live with it, but and re-weld the pegs or find a folding back from a pre 86. If you have access to a grinder + welder I'd djust do that.
>
>john
>
>
>
>
>
>>I=B9m wondering if a rear fold down seat from a stock 86 westfalia will fit in
>>my 83 diesel vanagon?  Anyone have any ideas?
>>
>>
>
>
>