This has been my experience with rebuilt CVs - NOT WORTH THE MONEY! Original, new, Lobro units will be slightly more expensive, but they last literally 100X longer. David Marshall Fast Forward Automotive Inc. 4356 Quesnel-Hixon Road Quesnel BC Canada V2J 6Z3 http://www.fastforward.ca mailto:sales@fastforward.ca Phone: (250) 992 7775 FAX: (250) 992 1160 - Vanagon Accessories and Engine Conversions - Vanagon, Transporter and Iltis Sales and Importation - European Lighting for most Volkswagen models
Due to the large volume of email we receive, PLEASE include previous emails when responding. This will allow us to read the complete dialogue in one message and will result in quicker and more accurate responses.
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Tom L. Salicos Sent: December 11, 2004 8:53 AM To: vanagon@GERRY.VANAGON.COM Subject: Struck Oil, Rebuilt CV's and a Tense Trip Home
A few weeks ago I posted about finding oil in a rear, inside CV boot on my Syncro. I had also bought two rebuilt rear shafts I had intended on installing myself. With the oil problem, I took Ravenous to my mechanic and he fixed the oil seal. He also installed the "new" shafts. Charged me for 1.6 hours and about $6 in parts, I think. I put on a couple hundred miles before taking my annual Oregon-Socal Thanksgiving trek. The trip down was completely fine. Not a drop of anything underneath when I stopped. Half quart of oil per 1000 miles, no change at all to coolant. That's at fairly fast freeway speeds (but trying hard to keep it under 130). Once there, after 50 miles or so, I started hearing a metallic rattling when I took off. I also thought my front wheels were scrubbing on acceleration. I posted this and got a few suggestions. One said he thought I had a CV joint that was about to leave me stranded. I talked a gentleman from VW Paradise in San Marcos into listening to my sound. Thanksgiving Eve, ready for a long weekend, they didn't have much time to offer. He thought there was a problem, but that the van was drivable. I decided to drive back home (1100 miles) but baby it all the way. Once home, I took Ravenous to my mechanic who diagnosed the sound as a rear CV joint. When he put the van up on the rack, the axle just fell out of the bearing assembly. He said the other side was noisy and didn't really want to leave it. So we put my two original axles back in. By then my most excellent list vendor was already shipping me a replacement for the first one. I will send all three rebuilt axle shafts back. The name on the green box is "ARI". My mechanic says they are the same ones he gets from NAPA. He said he checked his records and found that he had 11 out of 46 of these things fail. He doesn't like to use them, but folks don't want to pay $500 to have just the CV joints replaced. I think this is something I am going to learn how to do, thanks to a couple of great web sites. I pick up Ravenous today, so I don't yet know how much I will have spent, only to wind up with the same shafts. I guess it is a good vehicle if it gets you back home. Tom Salicos '87 Westy Syncro |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.