Date:         Mon, 13 Dec 2004 19:46:32 -0600
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: head work
Comments: To: mark drillock <drillock@EARTHLINK.NET>
Content-Type: text/plain; charset=iso-8859-1

On early Split and Bay busses up to 79 the engines need to be pulled to
replace the heads.
On Vanagons you can replace the heads and replace the rod bearings with the
engine in the van.
Oh! My aching back!
I've done several Air Cooled Vanagon head replacements without removing the
engines.
If you've got to pull both heads it's just better to pull the engine on a
Vanagon.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com
----- Original Message -----
From: "mark drillock" <drillock@EARTHLINK.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, December 13, 2004 7:28 PM
Subject: Re: head work


> No you don't. I have done many head/gasket replacements without removing
> the engine. I refer only to waterboxer and diesel Vanagons though. I
> think engine removal is needed for aircooled head replacement.
>
> Mark
>
> Jere Hawn wrote:
>
> >Hi All,
> >
> >
> >
> >Do you have to remove the engine to replace the heads?
> >
> >
> >
> >TIA
> >
> >MC & HNY
> >
> >Jere
> >
> >
> >
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.296 / Virus Database: 265.5.1 - Release Date: 12/13/2004
>
>



--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.5.1 - Release Date: 12/13/2004