Sorry-Typo 6mm is for the 6 point hex or allen key. 8mm for the 12 point. Dennis -----Original Message----- From: mark drillock [mailto:drillock@earthlink.net] Sent: Wednesday, December 15, 2004 4:40 PM To: dhaynes@optonline.net Subject: Re: So some CV's require a "custom" tool? Dennis, mine say 8 on them. 6mm for the hex type. Mark Dennis Haynes wrote: >Any good auto parts store with a KD rack or equivalent can get this for you. 6mm triple square or 12 point. For a really good one, go to Zelenda or Hazet. > >Dennis > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.