Date:         Thu, 16 Dec 2004 15:11:27 -0700
Reply-To:     jbrush@AROS.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Anonymous Digest <jbrush@AROS.NET>
Subject:      CV tool name. Got it. Now, what size is it, really?
In-Reply-To:  <41C134FD.20305@mchsi.com>

I am appreciative of the time so many took to offer a clarification about
the tool for taking off my CVs.

I think I have enough names that someone will recognize it :-) and if not,
I can chase after the Snap-On guy and get it done.

The only mystery that remains is the size of the head, as replies are
mixed between 6 and 8mm. The writeup on Volkscafe infers 6mm as well.

It sure looks bigger than six, but I wouldn't mind getting the right one
the first time.

Also,  assume that when I go into the "cave" to remove the outside joint,
if I find hex heads, they will be 6mm? I'm too sore up to be going up and
down to chase tools. Once I get under there, I would like to have the
right stuff :-)

As always, thanks a lot.

John