At 08:52 PM 12/27/2004, you wrote: >I'm in the process of stripping a 2.1 engine to the long-block so that >I can put the cooling system from a 1.9 onto it. I notice that there >is some type of sensor that is mounted into the block by the oil >filter. See picture below. Is this an oil-temp sensor? The 1.9 >does not have this sensor. Yeah, that's the .9bar sensor that monitors pressure when you're running over 2000rpm. It connects to the extra circuitry in the later model speedometer. I first discovered that sensor when the bonehead Jiffylube guy knocked it loose and the oil pressure warning buzzer scared the dickens out of me. John Bange '90 Vanagon "Geldsauger" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.