Are there any recommendations on how to plumb a 1.9 cooling system through the 2.1 oil cooler? While i don't have an oil temp sender, i'm pretty sure my oil is getting warm (personally, i'm going to add another coolant temp sender to the high oil pressure sender and toggle between senders at the dash. My 1.9 system van doesn't need that sensor anyway). I also already have the cooler in place, and it is just waiting for some coolant to flow through it... Thanks, -Damon
--- Dennis Haynes <dhaynes@OPTONLINE.NET> wrote: > That is the high pressure oil pressure sending > switch used by the dynamic oil pressure sending > system by the 86 and later Vanagons. With the 2.1 > engine, consider keeping the oil cooler and getting > coolant plumbed to it. The longer stroke requires > the oil cooler. > > Dennis ===== '84 Westy (Sparky) w/2.3L WBX Vancouver, BC
__________________________________ Do you Yahoo!? Send holiday email and support a worthy cause. Do good. http://celebrity.mail.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.