Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2004, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 27 Dec 2004 22:54:55 -0800
Reply-To:     Craig Oda <craigoda@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Craig Oda <craigoda@GMAIL.COM>
Subject:      Re: 2.1 waterboxer oil temp gauge?
In-Reply-To:  <6.1.2.0.2.20041227220512.03998160@mail.dslextreme.com>
Content-Type: text/plain; charset=US-ASCII

John, Thanks for the info. Since I don't need the .9bar sensor, does anyone know if I can unscrew the pressure sender and drop in a VDO oil temp gauge? I've already got a VDO pressure sender unit that I'm going to use on the bottom of the block in the normal pressure sender location with adapter.

I notice that VDO has an 300F temp sender unit with a M10x1 thread and another with an M12x1.5 thread.

Does anyone know if: 1) this is a good location for a temp sender 2) a common sender will fit

Here's the pict again. Note that the oil cooler is removed in this picture, the tube for the oil filter is shortened to accept the filter without the cooler, and the water pump is removed. Your 2.1 block probably looks different. http://oda.bz/vanagon/stand/van_engine/van_engine-Pages/Image0.html

I suppose I could just unscrew it and get a thread gauge on the sender. However, if anyone has done this before or has an opinion on the location, pass on the info.

-- Craig

On Mon, 27 Dec 2004 22:07:59 -0800, jbange <hfinn@ingrates.net> wrote: > At 08:52 PM 12/27/2004, you wrote: > >I'm in the process of stripping a 2.1 engine to the long-block so that > >I can put the cooling system from a 1.9 onto it. I notice that there > >is some type of sensor that is mounted into the block by the oil > >filter. See picture below. Is this an oil-temp sensor? The 1.9 > >does not have this sensor. > > Yeah, that's the .9bar sensor that monitors pressure when you're running > over 2000rpm. It connects to the extra circuitry in the later model > speedometer. I first discovered that sensor when the bonehead Jiffylube guy > knocked it loose and the oil pressure warning buzzer scared the dickens out > of me. > > John Bange > '90 Vanagon "Geldsauger" >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.