Date: Tue, 28 Dec 2004 17:30:50 -0500
Reply-To: Ken Lewis <kdlewis_wasting_time@ACCESS4LESS.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Ken Lewis <kdlewis_wasting_time@ACCESS4LESS.NET>
Subject: Re: 2.1 waterboxer oil temp gauge?
Content-Type: text/plain; charset="iso-8859-1"
Craig,
First check the archives on this subject. There is tons of good info there.
http://gerry.vanagon.com/archives/vanagon.html
Some of the issues I recall are
1> the oil cooler. Needed for the longer stroke engine.
2>exhaust system. The 1.9L system's does not permit the usage of the oil
cooler.
The .9 bar sensor is not needed with the digijet system. The sensor is
screwed into an adapter so you might be able to find/make an adapter to use
the oil temp sensor.
Ken Lewis
http://neksiwel.20m.com/
----- Original Message -----
From: "Craig Oda" <craigoda@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, December 28, 2004 1:54 AM
Subject: Re: [VANAGON] 2.1 waterboxer oil temp gauge?
> X-SpamDetect-Info: ------------- Start SmiteSpam results ---------------
> X-SpamDetect-Info: This message may be spam. This message BODY has been
altered so
> X-SpamDetect-Info: your mail client can be set to filter it, see
http://smitespam.com/body.htm
> X-SpamDetect: **: 2.899000 Contains a URL in the BZ top-level domain=2.9
> X-SpamDetect-Info: ------------- End SmiteSpam results ---------------
>
> John,
> Thanks for the info. Since I don't need the .9bar sensor, does anyone
> know if I can unscrew the pressure sender and drop in a VDO oil temp
> gauge? I've already got a VDO pressure sender unit that I'm going to
> use on the bottom of the block in the normal pressure sender location
> with adapter.
>
> I notice that VDO has an 300F temp sender unit with a M10x1 thread and
> another with an M12x1.5 thread.
>
> Does anyone know if:
> 1) this is a good location for a temp sender
> 2) a common sender will fit
>
> Here's the pict again. Note that the oil cooler is removed in this
> picture, the tube for the oil filter is shortened to accept the filter
> without the cooler, and the water pump is removed. Your 2.1 block
> probably looks different.
> http://oda.bz/vanagon/stand/van_engine/van_engine-Pages/Image0.html
>
> I suppose I could just unscrew it and get a thread gauge on the
> sender. However, if anyone has done this before or has an opinion on
> the location, pass on the info.
>
> -- Craig
>
>
> On Mon, 27 Dec 2004 22:07:59 -0800, jbange <hfinn@ingrates.net> wrote:
> > At 08:52 PM 12/27/2004, you wrote:
> > >I'm in the process of stripping a 2.1 engine to the long-block so that
> > >I can put the cooling system from a 1.9 onto it. I notice that there
> > >is some type of sensor that is mounted into the block by the oil
> > >filter. See picture below. Is this an oil-temp sensor? The 1.9
> > >does not have this sensor.
> >
> > Yeah, that's the .9bar sensor that monitors pressure when you're running
> > over 2000rpm. It connects to the extra circuitry in the later model
> > speedometer. I first discovered that sensor when the bonehead Jiffylube
guy
> > knocked it loose and the oil pressure warning buzzer scared the dickens
out
> > of me.
> >
> > John Bange
> > '90 Vanagon "Geldsauger"
> >
>
|