Yea Chris, You can change the brushes for about $10.00 Then as long as your there might as well change the starter drive 25 to 30 dollars depending where your buying your parts. Oh. You might want to change the armature bearings as long as you have it apart. Add another 10 to 15 dollars. And then you better think about having the windings growled to make sure they are not shorted. Who know's how much that will cost. So by the time it's all said and done you could have either bought a good used starter for 40 to 50 dollars, or just popped for a rebuilt one. Either way it isn't going to be cheap. Good Luck, RC |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.