Date:         Thu, 30 Dec 2004 22:04:24 +0100
Reply-To:     jens.jakob.andersen@POST.DK
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jens Jakob Andersen <jens.jakob.andersen@POST.DK>
Subject:      SV: Expansion tank not connected
Comments: To: inua@charter.net
Content-Type: text/plain; charset="iso-8859-1"

Hi

I have the expansionb tank. Yup.

I have the overflow tank.

I am missing pipe between those two.

ANy valves or similar there, or just a piece of pipe?

/JJ

-----Oprindelig meddelelse-----
Fra: John Rodgers [mailto:inua@charter.net]
Sendt: 30. december 2004 14:29
Til: Jens Jakob Andersen, PDI
Cc: vanagon@GERRY.VANAGON.COM
Emne: Re: Expansion tank not connected


You should have two tanks in the system. As seen from the rear of the 
van looking forward, the expansion tank should be on the left, just 
forward of the bumper. The overflow tank should be in the middle just in 

front of the bumper and with the fill cap exposed to the access door 
where the vehicle tag mounts. There should be a small hose from the 
expansion tank cap over to the bottom right side of the overflow tank.  
There should be two hoses or connections  to the expansion tank. And 
there should be a sensor in the top of the expansion tank.

If you don't have all these things..........then Yup!, your cooling 
system is incomplete.

Regards,

John Rodgers
88 GL Driver



Jens Jakob Andersen wrote:

>Howdy
> 
>On my WBX, the expansion tank is NOT connected.
> 
>A bit weird...
> 
>I am not sure why this, and what is missing.
> 
>Any experts out there on the cooling system?
> 
>/JJ
>
>
>  
>