Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2004, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 30 Dec 2004 16:49:14 -0600
Reply-To:     Max Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <maxjoyce@IPA.NET>
Subject:      Re: Rear panel clips found a new way
Comments: To: Doug in Calif <vanagon@ASTOUND.NET>
In-Reply-To:  <003601c4ee48$e4a856b0$640fa8c0@ttowerdef17>
Content-Type: text/plain; charset="us-ascii"; format=flowed

I, too, had the vinyl shrink when I went to Dynamat the rear hatch and all those clips went to Shatterville and never came back. I opted for replacing the panel with an 1/8" piece of black textrured ABS plastic from the local plastic wholesaler and used the old one for a pattern. I drilled the holes right where the old panel said to and then went to NAPA and bought a sack of their upholstery push-in holder thingies and it's been stylin' ever since. Next time I pry it out, pretty good chance things'll stay in one piece. Don't remember what I paid for the plastic, but I got it out of their leftovers pile, so it was prolly around $10. DM&FS

>The vinyl on the board was shrinking badly. >I used my heat gun to warm the vinyl and it came right off. >Next I used some good Dap weld wood adheisive and some nice indoor out door >carpet from my local yard birds. >Here's the kicker. with the holes covered I found out I could use regular >door panel clips in the holes of the panel and pop the panel on like a door >panel. >MUCH nicer to remove in the future, you dont shoot your eye out when those >darn fixed buttons shatter into a bizillion pieces trying to remove the >panel. > >You could still use the clips even if you do not recover the board you will >just see the tops of the clips. > >cheers >Doug >----- Original Message ----- >From: "Brent Berisford" <bberisford@COMCAST.NET> >To: <vanagon@GERRY.VANAGON.COM> >Sent: Wednesday, December 29, 2004 5:12 PM >Subject: Rear panel clips > > >Group > I'm looking for the clips that hold the rear inside panel on the rear >hatch. Any color will do. >Thanks in Advance. >Brent > > >--- >Outgoing mail is certified Virus Free. >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.824 / Virus Database: 562 - Release Date: 12/28/04


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.