I used a small utility knife to cut the hose as far down into the metal ferrule as I could, I was then able to pull the hose off the injectors with the help of pliers. Make sure you get the right high pressure FI fuel line and FI fuel line clamps that have roles edges. (FYI I bought a complete kit with instructions from Vanagain). Pascal '84 Westy
On Mon, 3 Jan 2005 11:52:07 -0600, Jim Felder <felder@KNOLOGY.NET> wrote: >But when I get out to the injectors themselves, I see that on their very short hoses there is >a band clamp on one end but the other is swaged into a cup-like metal >ferrule. > >On account of that ferrule, how does one deal with replacing that final >bit of hose? > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.