Hi all well it looks like JB weld or PC7 will fix the pitting issue for the pump and i sandblasted all the tubes and painted with por-15. painted all the tubes and brackets black por 15 and the silver por 15 all the aluminum pcs. now the aluminum a/c , power steering, front engine supports are all pretty silver and can just be wiped off and look great. now to put this pig back together should i high temp RV the bits and pcs back together or if the mate surface is good just gasket and bolt it up? if it was an air sucker i wouldnt be asking. thanks Jonce |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.