How about some kind of aerodynamic insert for the Westy's exterior luggage compartment? ------ Original Message ------ Received: Mon, 03 Jan 2005 02:27:47 PM PST From: John Rodgers <inua@CHARTER.NET> To: vanagon@GERRY.VANAGON.COM Subject: Re: [NVC] Vacuum Forming > Jim, thanks for the nice list of possibilities. Often, many of these > things are only suited to injection molding, so I have to scrutinize > them closely. But what you listed is deginitely food for thought. > > John Rodgers > 88 GL Driver > > Jim Felder wrote: > > > Seems like there ought to be a good market for retrofit air conditioner > > housings front and rear, replacement AC ducting, front heater duct > > covers early and late model, and the often-smashed rear side air ducts > > that run up the inside of the d-pillars. > > > > Jim > > > > On Jan 3, 2005, at 2:06 PM, John Rodgers wrote: > > > >> I now have access to a fair sized vacuum forming machine. Has a 6" x > >> 24" x 48" forming capacity. Can vacuum form materials up to 1/4 inch > >> thick. > >> > >> Anybody need vacuum forming??? > >> > >> Thanks, > >> > >> Regards, > >> > >> John Rodgers > >> > > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.