Raj, Ask about this on the Syncro list. As I recall, there was someone making replacement drive shafts that were "slipper" shafts, someone there should know about it. If not, someone there will certainly know where to get a driveshaft... Don in Reidsville, NC 1987 Vanagon GL Syncro (Suzie) 1988 Vanagon GL (Sylvia) ----- Original Message ----- From: "Rajesh Injety" <wolfvanagon@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Fri 07 January 2005 14:34 Subject: more about my synco question
> first--thanks to all of you who gave me all the info about my syncro > question. > > so here is what i now know about this van. > the drive shaft was removed when it was towed by a previous owner. when > said owner moved to another place of residence, the drive shaft was lost, > or just plain forgotten about. > > so as far as anyone can tell the whole system would work fine if the drive > shaft was replaced. > the seller of the van said the rear locker works... > ive yet to look for a drive shaft, i will do so after i send this email. > > ok, thats it. > thanks again for all your help thus far. > > raj > 88 wolfsburg edition > vanagon GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.