Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2005, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 1 Jan 2005 09:13:22 -0700
Reply-To:     jimt <camper@TACTICAL-BUS.INFO>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         jimt <camper@TACTICAL-BUS.INFO>
Subject:      Re: Time to check the fuel lines! R & R !! No burnt VW's in 2005!
Comments: To: Detroit Bus <detroit.bus@GMAIL.COM>
In-Reply-To:  <42d2267e05010107153d0a6b58@mail.gmail.com>
Content-type: text/plain; charset="ISO-8859-1"

Talking with a Fireman during our quick cold snap. He said they see a jump in engine fires during those cold snaps as well as the extreme hot days.

The same pattern for hoses and belts and batteries. As the rubber (or battery) ages it becomes more prone to stresses. (maybe I should take another look in the mirror and see if I am showing any more stress marks) jimt

On 1/1/05 8:15 AM, "Detroit Bus" <detroit.bus@GMAIL.COM> wrote:

> Following up on my post from a few weeks ago suggesting that we make a > mass effort to inspect and/or replace our fuel lines on the weekend > after New Year's, I'm starting this thread to discuss any problems or > ideas anyone might have. > > I got a head start last night and re-hosed all my injectors and the > fuel rails (cigar tubes).. The most difficult task was digging out the > old hose around the collar of the fuel injector. Also problematic was > the fact that at least half of my hose clamps have rusted into > barnacles, so I was unable to uncrew them. I had to use my x-acto > knife to cut out the hose from under the clamps (after removing entire > fuel rail with injectors attached from engine). This took at least 20 > minutes per clamp as the hose is very strong. Two alarming findings > so far: one clamp was so rusted i was able to tear it apart with my > fingers, and I found tiny cracks in the underside of every injector > hose--they were all originals. Yikes. > > Don't forget to use proper FI clamps and high-pressure hose. Photos of > these and a great step-by-step approach can be found on Ben's website, > which I've been using: > > http://www.benplace.com/fuel_line.htm > > Hope to see some new fuel lines today out there! > > -- > Garrick, Queens, NY (currently in Detroit, Michigan) > '87 GL Weekender > > ***** > With fond remembrances of: > '77 Beetle > '67 Bus > '59 Pickup sn# 460440 > '67 Beetle > '76 Camper Bus > >

•••••••••••••••••••••••••••••••••••••••• jimt Planned insanity is best. Remember that sanity is optional. http://www.tactical-bus.info (tech info) http://www.westydriver.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.